Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation


Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
- 5. Fuel and exhaust systems
   + 5.1. Carburetor engines
   - 5.2. Engines with fuel injection
      5.2.1. Technical characteristics
      5.2.2. Decompression of fuel system
      + 5.2.3. Fuel pump and pressure of fuel
      5.2.4. Gasoline pipe lines and joints
      5.2.5. Fuel pump
      5.2.6. Fuel level sensor
      5.2.7. Air filter
      5.2.8. Cable of a drive of a butterfly valve
      + 5.2.9. System of electronic injection of fuel (EFI system)
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes









5.2.5. Fuel pump

Removal

PERFORMANCE ORDER
1. Execute a decompression.
2. Disconnect the battery from weight.
3. Remove a fuel tank (on cars of 1988-90)
4. On cars from 1991 of release remove an average seat and the hatch.
5. Disconnect the socket and gasoline pipe line tubes.
6. Unscrew bolts (are specified by shooters) fastenings of the fuel pump and the fuel level sensor.
7. Having inclined, carefully get from a fuel tank the fuel pump assembled with the sensor.
8. Having carefully hooked the lower part of the pump get the pump from an arm.
9. Remove from the pump rubber laying.
10. Remove a lock washer of fastening of the filter of rough cleaning to the pump.
11. Remove the filter and check its condition. In case of strong pollution the filter replace.
12. If replacement of the filter of rough cleaning that is made only establish the new filter, a washer, laying and insert the lower part of the pump back into an arm. Establish the pump assembled with the sensor in a fuel tank.
13. If the fuel pump is replaced, remove a collar and disconnect a hose.
14. Disconnect wires from conclusions of the pump and remove the pump.

Installation

PERFORMANCE ORDER
1. Installation is carried out upside-down.
2. Replace laying of unions of gasoline pipe lines.