Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation


Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
- 5. Fuel and exhaust systems
   + 5.1. Carburetor engines
   - 5.2. Engines with fuel injection
      5.2.1. Technical characteristics
      5.2.2. Decompression of fuel system
      + 5.2.3. Fuel pump and pressure of fuel
      5.2.4. Gasoline pipe lines and joints
      5.2.5. Fuel pump
      5.2.6. Fuel level sensor
      5.2.7. Air filter
      5.2.8. Cable of a drive of a butterfly valve
      + 5.2.9. System of electronic injection of fuel (EFI system)
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes









5.2.6. Fuel level sensor

Check

PERFORMANCE ORDER
1. Before fuel level sensor check completely fill a tank with gasoline.
2. On cars of 1988-90 find the socket which is near a tank, on cars from 1991 of release remove a back seat and a hatch cover.
3. Disconnect the fuel level sensor socket.
4. Measure resistance of the sensor between conclusions.
5. At completely filled tank resistance should be 17 Ohms (1988-90) or 3 Ohm on cars since 1991.
6. At an empty tank resistance should be 120 Ohms (1988-90) or 110 Ohm on cars since 1991.
7. Replace the sensor if resistance differs from the specified.
8. The sensor can be checked also, having removed it from a tank. Measure resistance at completely lowered float (a tank empty) and in the extreme top provision of a float (a full tank).

Replacement

PERFORMANCE ORDER
1. Remove from a fuel tank the pump assembled with the sensor.
2. Incline and carefully get the sensor.
3. Disconnect the socket, unscrew screws of fastening and remove the sensor.
4. The sensor is established upside-down.