1. Find on a wire the electric motor socket on the main plait and
disconnect the socket. |
| |
2. Check resistance between conclusions 2 and 3 sockets. Resistance should be 0,3–100 Ohm. Otherwise the electric motor replace. |
| 3. Check resistance of isolation (between conclusions 2 and 3 and weight) which should be not less than 0,5 Ohm. Otherwise the electric motor replace. |
| 4. Disconnect a hose сапуна and the electric drive socket. |
|
5. Unscrew bolts and remove the electric motor. |
| 6. Installation is carried out upside-down. |