Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
- 10. Body
   10.1. Maintenance and repair
   10.2. Vinyl furnish
   10.3. Upholstery and rugs
   10.4. Repair of insignificant damages
   10.5. Repair of considerable damages
   10.6. Loops and locks
   10.7. Windscreen and motionless glasses
   10.8. Cowl
   10.9. Latch of a cowl and drive cable
   10.10. Forward lattice
   10.11. Forward wing
   10.12. Internal panel of a door
   10.13. Door lock, lock and handle switch
   10.14. Door glass
   10.15. Window regulator
   10.16. Lateral mirrors
   10.17. Door
   10.18. Door of a back compartment
   10.19. Back cover (the top door of a back compartment)
   10.20. Casing of a steering column
   10.21. Panels of forward facing of salon
   10.22. Average floor section
   10.23. Forward facing panel of salon
   10.24. Seats
   10.25. Bumpers
+ 11. Electric equipment
+ 12. Electroschemes




10.13. Door lock, lock and handle switch

Cнятие and installation

DOOR LOCK

PERFORMANCE ORDER
1. Lift a window, remove the internal panel of a door and the water filter.
2. Working through apertures in a door framework, disconnect drafts of the lock from external and internal handles (on cars with the electric drive of the lock disconnect draft of an electromagnet).
3. All drafts fasten plastic latches. For a detachment of draft deduce a latch from gearing with draft and get draft from an opening.
4. Unscrew fastening screws (are specified by shooters) and remove the lock.
5. Installation is carried out upside-down.

EXTERNAL HANDLE AND LOCK SWITCH

PERFORMANCE ORDER
1. Lift a window, remove the internal panel of a door and the water filter.
2. Working through apertures in a door framework, disconnect latches of fastening of drafts of the lock. Access to the external handle is provided through an aperture in a door framework.
3. Unscrew fastening bolts, get a bracket of fastening of a vyklyuyaatel of the lock (or unscrew a bolt).
4. Remove the handle assembled with the lock switch.
5. Installation is carried out upside-down.

INTERNAL HANDLE

PERFORMANCE ORDER
1. Remove the internal panel of a door and the water filter.
2. Unscrew bolts (are specified by shooters), turn the handle and disconnect from the internal handle of draft of a drive of the lock.
3. Installation is carried out upside-down.