Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
- 10. Body
   10.1. Maintenance and repair
   10.2. Vinyl furnish
   10.3. Upholstery and rugs
   10.4. Repair of insignificant damages
   10.5. Repair of considerable damages
   10.6. Loops and locks
   10.7. Windscreen and motionless glasses
   10.8. Cowl
   10.9. Latch of a cowl and drive cable
   10.10. Forward lattice
   10.11. Forward wing
   10.12. Internal panel of a door
   10.13. Door lock, lock and handle switch
   10.14. Door glass
   10.15. Window regulator
   10.16. Lateral mirrors
   10.17. Door
   10.18. Door of a back compartment
   10.19. Back cover (the top door of a back compartment)
   10.20. Casing of a steering column
   10.21. Panels of forward facing of salon
   10.22. Average floor section
   10.23. Forward facing panel of salon
   10.24. Seats
   10.25. Bumpers
+ 11. Electric equipment
+ 12. Electroschemes




10.8. Cowl

GENERAL INFORMATION

Prevention

Works are carried out together.


Removal and installation

PERFORMANCE ORDER
1. Open a cowl and close rags wings and an air inlet lattice.
2. Outline contours of loops of a cowl.
3. Disconnect all hoses and wires which can prevent cowl removal.
4. Lift a cowl and ask the assistant to hold him. Remove a rack of a cowl and unscrew nuts (or bolts) fastenings of loops.
5. Remove a cowl.
6. Installation is carried out upside-down.

Adjustment

PERFORMANCE ORDER
1. The provision of a cowl across is regulated by its moving in cuts of loops at the released bolts.
2. Outline contours of loops.
3. Release bolts and move a cowl to the necessary situation then bolts tighten. Move a cowl gradually, periodically checking adjustment.
4. After installation it is necessary to adjust the provision of a latch on a vertical and across so that the cowl was densely closed, and the surface of a cowl was aflush with wings. Outline bolts of a latch of a clamp of a cowl, release bolts (are specified by shooters) and adjust the provision of a latch. Tighten bolts.
5. A cowl and loop latch periodically grease the litoly.