Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation

Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
- 7. Transmission
   + 7.1. Mechanical transmission
   + 7.2. Automatic transmission
   + 7.3. Transfer case
   - 7.4. Coupling, driveshafts, semi-axes and leading bridges
      7.4.1. Technical characteristics
      - 7.4.2. Coupling Coupling details Vyzhimna bearing The directing bearing Main cylinder of coupling Working cylinder of coupling Coupling hydraulic actuator Coupling pedal
      + 7.4.3. Kardanny (е) shaft (ы), reducer and axes
      7.4.4. Forward semi-axis and epiploon
      + 7.4.5. Back (forward) bridge
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes Vyzhimna bearing


1. Disconnect the battery from weight.
2. Remove transmission.
3. Get a spring bracket from a spherical support of a fork, disconnect a fork from a spherical support and remove vyzhimny the bearing.
4. The bearing should rotate freely in a holder.
5. Otherwise the bearing replace. To wash out the bearing in solvent it is forbidden.
6. Grease directing plug of the bearing and a shlitsa of primary shaft with refractory greasing.
7. Grease with refractory greasing dredging under a spherical support of a fork.
8. Grease places of fastening of the bearing and dredging under a pusher of the working cylinder.
9. Establish a spring bracket.
10. Dress brackets and establish on a fork the bearing.
11. Dress the bearing on primary shaft of a check point.
12. Pass a fork through a cover, grease a support and dress a fork on a support, having pressed on it before click.
13. Slightly grease with refractory greasing a surface of the bearing adjoining to a diafragmenny spring.
14. Further assembly is carried out upside-down.