Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
- 4. Systems of cooling, heating
   4.1. Technical characteristics
   4.2. Antifreeze
   4.3. Thermostat
   4.4. Krylchatka of the fan and hydrocoupling
   4.5. Radiator and broad tank
   4.6. Maslookhladitel
   4.7. Pump of system of cooling
   4.8. Sensor of temperature of liquid
   4.9. Electric motor and chain of the fan of a heater
   4.10. Heater radiator
   + 4.11. Control panel heater and conditioner
   4.12. Central air and heating
   4.13. Conditioner moisture separator
   4.14. Conditioner compressor
   4.15. Condenser
   4.16. Evaporator and broad valve
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes




4.14. Conditioner compressor

GENERAL INFORMATION

Details of fastening of the compressor

1. Arm
 

Removal and installation

PERFORMANCE ORDER
1. Depressurize the conditioner and remove a coolant in car-care center.
2. Disconnect the battery from weight.
3. Remove from the compressor a belt.
4. Disconnect the socket, disconnect coolant tubes.
5. Unscrew bolts of fastening and remove the compressor.
6. If the new compressor is established, execute all procedures specified in the enclosed instruction.
7. Installation is carried out upside-down.
8. Replace all sealing rings, having picked up them as the compressor and having greased with special greasing (depends on type of an applied coolant).
9. Fill system in car-care center.