Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation


Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
- 4. Systems of cooling, heating
   4.1. Technical characteristics
   4.2. Antifreeze
   4.3. Thermostat
   4.4. Krylchatka of the fan and hydrocoupling
   4.5. Radiator and broad tank
   4.6. Maslookhladitel
   4.7. Pump of system of cooling
   4.8. Sensor of temperature of liquid
   4.9. Electric motor and chain of the fan of a heater
   4.10. Heater radiator
   + 4.11. Control panel heater and conditioner
   4.12. Central air and heating
   4.13. Conditioner moisture separator
   4.14. Conditioner compressor
   4.15. Condenser
   4.16. Evaporator and broad valve
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes









4.5. Radiator and broad tank
GENERAL INFORMATION

Radiator and adjacent details
1. Perepuskna hose
2, 20. Radiator hose
3. Bracket of fastening of the battery
4. Battery
5. Tray
6. Casing
7. Krylchatka and coupling
8. Forward lattice
9, 13. Arm
 10. Drain crane
11. Laying
12. Radiator
14, 18. Amortiziruyushchy plug
15. Hose of a maslookhladitel
16, 19. Plug of a rack of a radiator
17. Radiator stopper
21. Hose of a broad tank

Removal and installation

RADIATOR

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. After complete cooling of the engine merge liquid.
3. Disconnect from a radiator the top and bottom hoses.
4. Disconnect from a radiator a tank hose.
5. Remove a krylchatka.
6. On cars equipped with automatic transmission disconnect from a radiator of the union of tubes of a cooler.
7. Substitute the pallet for collecting the spilled liquid, muffle the union.
8. Unscrew bolts of the central rack of a forward lattice.
9. Remove two top arms of fastening of a radiator. Unscrew all bolts of fastening (are specified by shooters) radiator.
10. Remove a radiator, having lifted it up.
11. Check existence of leaks from a radiator, mechanical damages, purity of internal channels.
12. In need of repair of a radiator address in car-care center as will be necessary application special the equipment and technologies.
13. Carefully clear intercostal spaces of a radiator, having blown it the compressed air and having cleared a soft brush.
14. The radiator is established a radiator upside-down.
15. After installation of a radiator fill in liquid.
16. Start the engine and be convinced of lack of a leak.
17. Warm up the engine and again check level of cooling liquid, if necessary restore.
18. On cars with automatic transmission check level of transmission liquid, if necessary restore.

BROAD TANK

PERFORMANCE ORDER
1. On the majority of cars the tank simply gets from an arm close to the battery. Take aside a tee from a tank (it is specified by an arrow) and remove a tank from an arm (the right arrow).
2. Merge in a vessel liquid from a tank, examine a tank.
3. At detection of signs of damages a tank replace.
4. The tank is established upside-down.