Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
- 8. Brake system
   8.1. Technical characteristics
   + 8.2. ABS system
   8.3. Blocks of disk brakes (forward or back)
   8.4. Brake support
   8.5. Brake disk
   8.6. Blocks of drum-type brakes
   8.7. Wheel cylinder of brakes
   8.8. Main cylinder of brakes
   8.9. Hoses and hydraulic actuator tubes
   8.10. Air removal from a hydraulic actuator of brakes
   8.11. Vacuum amplifier of brakes
   8.12. Blocks of the hand brake of back disk brakes
   8.13. Adjustment of the hand brake
   8.14. Cable of the hand brake
   8.15. Switch of a signal of braking
   8.16. A regulator of pressure of back brakes (dosing out and perepuskny the valve)
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes




8.14. Cable of the hand brake

Replacement

PERFORMANCE ORDER
1. Remove the central section then access to a regulator is provided.
2. Release the lever of a brake and unscrew a lock-nut and an adjusting (bottom) nut.
3. Remove a cable from the lever.
4. Working under the car, extend a cable, having passed through an opening in a floor.
5. Remove from a frame cable arms.
6. Remove from a crank an axis (it is specified by an arrow) and a bracket.
7. Unscrew an arm bolt (it is specified by an arrow) on the jack and remove a cable.
8. Installation is carried out upside-down.
9. After assembly adjust the hand brake.