Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
- 8. Brake system
8.1. Technical characteristics
+ 8.2. ABS system
8.3. Blocks of disk brakes (forward or back)
8.4. Brake support
8.5. Brake disk
8.6. Blocks of drum-type brakes
8.7. Wheel cylinder of brakes
8.8. Main cylinder of brakes
8.9. Hoses and hydraulic actuator tubes
8.10. Air removal from a hydraulic actuator of brakes
8.11. Vacuum amplifier of brakes
8.12. Blocks of the hand brake of back disk brakes
8.13. Adjustment of the hand brake
8.14. Cable of the hand brake
8.15. Switch of a signal of braking
8.16. A regulator of pressure of back brakes (dosing out and perepuskny the valve)
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes
|
Switch arrangement
|
|
The switch (it is specified by an arrow) is mounted in the top part of a pedal. By pressing a pedal contacts of the switch become isolated and the lamp of a signal of braking lights up. |
Removal and installation
| PERFORMANCE ORDER |
| 1. Disconnect the battery from weight. |
| 2. Disconnect from the switch the socket. |
| 3. Release a lock-nut and remove the switch from a pedal arm. |
| 4. Installation is carried out upside-down. |
|
Adjustment
| PERFORMANCE ORDER |
| 1. Release a lock-nut and move the switch, having established a standard gap with a pedal. |
| 2. Attach wires to the switch, connect the battery to weight. |
| 3. Check operation of the switch. |
|
|
|