Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation

Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1. Engines 2F and 3F-E
   - 3.2. Verkhneklapanny engine 1FZ-FE
      3.2.1. Technical characteristics
      3.2.2. Types of repair without engine dismantle
      3.2.3. Cover of a head of cylinders
      3.2.4. A soaking-up collector
      3.2.5. Final collector
      3.2.6. Cam-shafts and pushers
      3.2.7. Head of cylinders
      3.2.8. Cover of a chain drive of cam-shafts
      3.2.9. Forward epiploon of the crankshaft
      3.2.10. Oil pallet
      3.2.11. Oil pump
      3.2.12. Flywheel (a leading disk of the hydrotransformer)
      3.2.13. Back epiploon of the crankshaft
      3.2.14. Suspension bracket and engine details
   + 3.3. Dismantle and major maintenance of the engine
   + 3.4. Engine electric equipment
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes

3.2.9. Forward epiploon of the crankshaft


1. Remove belts and a crankshaft pulley.
2. Define depth of a press fitting of an epiploon, then carefully get an epiploon from the case of the oil pump, having hooked a screw-driver or the special tool.
3. It is possible to make an incision also an epiploon (1 – a place of a cut of an epiploon at removal).
4. Clear an opening under an epiploon in the case of the oil pump, slightly oil an external surface for the engine, working edges of a new epiploon grease with molybdenic greasing.
5. Carefully without distortions press a new epiploon into place by means of an opravka with a diameter a little smaller than diameter of an epiploon. To press on the depth noted before dismantling. After installation be convinced that кроымка an epiploon was not unbent.
6. Establish other details upside-down.
7. Start the engine and be convinced of lack of a leak.