Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation

Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
- 9. Suspension brackets and steering
   9.1. Technical characteristics
   9.2. Stabilizer of a forward suspension bracket and plug
   9.3. Lobbies and back shock-absorbers
   9.4. Springs and plugs
   9.5. Springs of suspension brackets (and/m FJ80)
   9.6. Cross-section bar (and/m FJ80)
   9.7. Suspension bracket levers (and/m FJ80)
   9.8. Rotary fist
   9.9. Steering wheel
   9.10. Steering drafts
   9.11. Reducer
   9.12. Pump of the hydraulic booster
   9.13. Air removal from the power steering
   9.14. Wheels and tires
   9.15. Corners of installation of forward wheels
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes

9.11. Reducer




If the car is equipped with a safety cushion, turn of wheels after removal of a reducer is not allowed. Block a wheel for what transfer the ignition key to the situation LOCK, or wind a wheel with a seat belt which fix.

1. Lift a car front.
2. Turn on and muffle the union (are specified by shooters).
3. Designate the provision of the bottom fork of the kardanny hinge of a steering shaft concerning a reducer shaft. Unscrew a collar bolt (it is specified by an arrow).
4. Remove a soshka.
5. Unscrew fastening bolts (are specified by shooters), submit a reducer down and disconnect from an intermediate steering shaft. Remove a reducer.


1. Establish a reducer, having combined the labels put at dismantling.
2. Tighten fastening bolts with the set moment.
3. Establish a soshka on a reducer shaft, having combined the labels put at dismantling.
4. Tighten a collar bolt with the set moment.
5. Attach the union of the hydraulic booster and restore liquid level.
6. Establish a wheel and lower the car.