Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation


Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
- 9. Suspension brackets and steering
   9.1. Technical characteristics
   9.2. Stabilizer of a forward suspension bracket and plug
   9.3. Lobbies and back shock-absorbers
   9.4. Springs and plugs
   9.5. Springs of suspension brackets (and/m FJ80)
   9.6. Cross-section bar (and/m FJ80)
   9.7. Suspension bracket levers (and/m FJ80)
   9.8. Rotary fist
   9.9. Steering wheel
   9.10. Steering drafts
   9.11. Reducer
   9.12. Pump of the hydraulic booster
   9.13. Air removal from the power steering
   9.14. Wheels and tires
   9.15. Corners of installation of forward wheels
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes









9.15. Corners of installation of forward wheels
GENERAL INFORMATION

Corners of installation of forward wheels

 Disorder = A-in

With – a deviation from a vertical

D–tilt angle of an axis of turn

Convergence = E-F

G–corner of a convergence of wheels

The convergence of wheels is regulated by rotation of tips of steering drafts.

Disorder of wheels and tilt angle of an axis of turn are only checked to receive information on a condition of details of a suspension bracket. Disorder of wheels and a tilt angle of an axis are not regulated and provided with a suspension bracket design. Violation of disorder of wheels indicates wear of bearings or other details.

Prevention

It is forbidden to regulate disorder by a warming up of details of a suspension bracket or a bridge beam with the subsequent their podgibaniye.