Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation

Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
- 9. Suspension brackets and steering
   9.1. Technical characteristics
   9.2. Stabilizer of a forward suspension bracket and plug
   9.3. Lobbies and back shock-absorbers
   9.4. Springs and plugs
   9.5. Springs of suspension brackets (and/m FJ80)
   9.6. Cross-section bar (and/m FJ80)
   9.7. Suspension bracket levers (and/m FJ80)
   9.8. Rotary fist
   9.9. Steering wheel
   9.10. Steering drafts
   9.11. Reducer
   9.12. Pump of the hydraulic booster
   9.13. Air removal from the power steering
   9.14. Wheels and tires
   9.15. Corners of installation of forward wheels
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes

9.13. Air removal from the power steering

PERFORMANCE ORDER

1. To delete air from a hydraulic actuator of a wheel it is necessary at any dismantling of the highway.

2. Expose wheels in the provision of driving on a straight line. Check liquid level, if necessary restore, having added to Cold label on щупе a tank.

3. Start the engine and transfer to an operating mode on fast single to a course. Check liquid level, if necessary restore, having added to Cold label on щупе a tank.

4. Turn wheels in both parties against the stop, without allowing blow about the limiter. Check and restore liquid level.

5. Return wheels to the provision of driving on a straight line. Some minutes later stop the engine.

6. Check level of liquid which on the heated-up engine should be on Hot mark. If necessary add.