Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
- 9. Suspension brackets and steering
   9.1. Technical characteristics
   9.2. Stabilizer of a forward suspension bracket and plug
   9.3. Lobbies and back shock-absorbers
   9.4. Springs and plugs
   9.5. Springs of suspension brackets (and/m FJ80)
   9.6. Cross-section bar (and/m FJ80)
   9.7. Suspension bracket levers (and/m FJ80)
   9.8. Rotary fist
   9.9. Steering wheel
   9.10. Steering drafts
   9.11. Reducer
   9.12. Pump of the hydraulic booster
   9.13. Air removal from the power steering
   9.14. Wheels and tires
   9.15. Corners of installation of forward wheels
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes




9.2. Stabilizer of a forward suspension bracket and plug

Removal

PERFORMANCE ORDER
1. Lift a car front.
2. Remove drafts of the stabilizer. On FJ60 cars, 62 remember an assembly order of details of drafts of the stabilizer – plates and plugs.
3. For removal of drafts it is enough to turn out bolts from arms.
4. Unscrew bolts of collars of plugs and remove the stabilizer.
5. Remove plugs of the stabilizer and check their condition of plugs. The damaged plugs (cracks, hardening of rubber, etc. signs) replace. If necessary replace plugs of drafts of the stabilizer.

Installation

PERFORMANCE ORDER
1. Establish new plugs.
2. Insert plugs into collars and establish the stabilizer. Bolts do not tighten.
3. Establish drafts and tighten nuts with the set moment.
4. Tighten stabilizer bolts with the set moment.