Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
- 9. Suspension brackets and steering
9.1. Technical characteristics
9.2. Stabilizer of a forward suspension bracket and plug
9.3. Lobbies and back shock-absorbers
9.4. Springs and plugs
9.5. Springs of suspension brackets (and/m FJ80)
9.6. Cross-section bar (and/m FJ80)
9.7. Suspension bracket levers (and/m FJ80)
9.8. Rotary fist
9.9. Steering wheel
9.10. Steering drafts
9.11. Reducer
9.12. Pump of the hydraulic booster
9.13. Air removal from the power steering
9.14. Wheels and tires
9.15. Corners of installation of forward wheels
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes
|
The power steering on engines 2F and 3F-E
1. Pump
2. Hose
3. Bolt
4. Arm |
5. Belt
6. Nut
7. Pulley
8. Tube |
Removal
| PERFORMANCE ORDER |
| 1. Remove a drive belt (see subsection 2.31). |
|
|
2. Remove as much as possible liquid from a tank, disconnect and muffle a hose and a tube of a high pressure. |
|
|
3. On cars with engines 2F and 3F-E unscrew forward bolts of fastening of the pump. On cars with the engine 1FZ-FE unscrew bolts of fastening of the pump to the block of cylinders. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is carried out upside-down. |
|
|
2. Tighten bolts and nuts with the set moment. On cars with the engine 1FZ-FE replace a sealing ring of the pump. |
| 3. Remove air from a hydraulic actuator (see subsection 9.13). |
|
|
|