Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
- 11. Electric equipment
   11.1. Search of malfunctions
   11.2. Safety locks
   11.3. Fusible crossing points
   11.4. Breakers
   11.5. Relay
   11.6. Breaker of indexes of turn / alarm system
   11.7. A combination of switches on a steering column
   11.8. Lock of ignition and lock drum
   11.9. Indexes of level of fuel, pressure and oil temperature
   11.10. Guard of devices
   11.11. Screen wiper electric motor
   11.12. Receiver and loudspeakers
   11.13. Aerial
   11.14. Heater of back glass
   11.15. Headlights
   11.16. Case of a halogen headlight
   11.17. Sound signal
   11.18. Replacement of lamps
   11.19. Lateral mirrors with the electric drive
   11.20. System cruise control
   11.21. Window regulator electric drive
   11.22. Electric drive of door locks
   11.23. Safety cushions
+ 12. Electroschemes









11.12. Receiver and loudspeakers

GENERAL INFORMATION

Receiver fastening on cars of early releases

Receiver fastening on cars of late releases

Screws of fastening are specified by shooters.

The tip of the aerial and the receiver socket (on all cars)

A.Shtekker of the aerial

V.Razjem of the receiver

Removal and installation

PERFORMANCE ORDER
1. Disconnect the battery from weight.
Receiver
2. On cars of early releases remove handles of management of the receiver. Then a long face key unscrew nuts of rollers of resistors and remove washers. Remove receiver facing.
3. On cars of late releases remove facing of a guard of devices.
4. Unscrew screws and submit the receiver on itself, disconnect the aerial and wire tip. Remove the receiver.
5. Establish the receiver upside-down.
The loudspeaker which has been built in in the forward panel of salon (cars of early releases)
6. Remove the receiver.
7. Remove a box for trifles.
8. Through the formed apertures unscrew fastening screws, disconnect the socket and remove the loudspeaker.
The loudspeaker which has been built in at a door (on cars of late releases)
9. Remove the facing panel of a door.
10. Unscrew fastening screws (are specified by shooters), disconnect the socket and remove the loudspeaker.
11. Installation is carried out upside-down.