Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation

Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
- 11. Electric equipment
   11.1. Search of malfunctions
   11.2. Safety locks
   11.3. Fusible crossing points
   11.4. Breakers
   11.5. Relay
   11.6. Breaker of indexes of turn / alarm system
   11.7. A combination of switches on a steering column
   11.8. Lock of ignition and lock drum
   11.9. Indexes of level of fuel, pressure and oil temperature
   11.10. Guard of devices
   11.11. Screen wiper electric motor
   11.12. Receiver and loudspeakers
   11.13. Aerial
   11.14. Heater of back glass
   11.15. Headlights
   11.16. Case of a halogen headlight
   11.17. Sound signal
   11.18. Replacement of lamps
   11.19. Lateral mirrors with the electric drive
   11.20. System cruise control
   11.21. Window regulator electric drive
   11.22. Electric drive of door locks
   11.23. Safety cushions
+ 12. Electroschemes

11.17. Sound signal



Previously check safety locks.


1. Disconnect from a signal the socket.
2. Directly connect to a signal the battery. In the absence of a sound a signal replace.
3. If the sound is, check tension on a conclusion by pressing the signal button. In the presence of tension check connection with weight.
4. If tension is not present, check the relay. It is necessary to consider that relays of a sound signal generally have 4 or 3 conclusions (3-выводные relays have connection with weight via the case).
5. If the relay is serviceable, check tension on relay conclusions. If tension is not present, check wires from a safety lock to the relay.
6. If on relay conclusions tension is, press the button of a signal and check a chain of connection with weight between the relay and the button. If break is not present, replace the signal button.
7. If via the button the chain on weight becomes isolated, check existence in a chain from the relay on the button of break or short circuit.


1. Remove a forward lattice.
2. For replacement of a sound signal disconnect the socket and unscrew fastening bolts (are specified by shooters) signal arm.
3. Installation is carried out upside-down.