Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation

Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   - 3.1. Engines 2F and 3F-E
      3.1.1. Technical characteristics
      3.1.2. Types of repair without engine dismantle
      3.1.3. Installation of the piston of the 1st cylinder in VMT
      3.1.4. Cover of a head of cylinders
      3.1.5. Lateral cover of the mechanism of a gazoraspredeleniye
      3.1.6. Yokes and bars of pushers
      3.1.7. Springs of valves, plates, maslosjemny caps
      3.1.8. Soaking-up and final collectors
      3.1.9. Head of cylinders
      3.1.10. Pushers
      3.1.11. Crankshaft pulley
      3.1.12. Forward epiploon of the crankshaft
      3.1.13. Forward cover
      3.1.14. Cam-shaft and drive gear wheels
      3.1.15. Cam-shaft and support
      3.1.16. Replacement of bearings
      3.1.17. Oil pallet
      3.1.18. Oil pump
      3.1.19. Flywheel (a leading disk of the hydrotransformer)
      3.1.20. Back epiploon of the crankshaft
      3.1.21. Suspension bracket and engine details
   + 3.2. Verkhneklapanny engine 1FZ-FE
   + 3.3. Dismantle and major maintenance of the engine
   + 3.4. Engine electric equipment
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes

3.1.11. Crankshaft pulley

Removal

PERFORMANCE ORDER

1. Disconnect the battery from weight.
2. Designate and remove drive belts.
3. Lift a car front.
	4. Unscrew 6 bolts and remove a pulley of the pump of the hydraulic booster from a crankshaft pulley.
	5. Unscrew a pulley bolt for what fix the crankshaft the adaptation. In the absence of the adaptation fix a flywheel (automatic transmission) or include transfer and the hand brake (manual transmission).
	6. Remove a pulley a stripper.

Installation

PERFORMANCE ORDER

1. Replace a forward epiploon (see subsection 3.1.12).

2. Grease a back part of a pulley with molybdenic greasing.

3. Dress a pulley, having combined a groove with a shponka of the crankshaft and easy blows of a hammer with soft brisk (or rotating a bolt) напрессуйте a pulley.

4. Tighten a bolt (nut) with the set moment.

5. Further assembly is carried out upside-down.