Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   - 3.1. Engines 2F and 3F-E
      3.1.1. Technical characteristics
      3.1.2. Types of repair without engine dismantle
      3.1.3. Installation of the piston of the 1st cylinder in VMT
      3.1.4. Cover of a head of cylinders
      3.1.5. Lateral cover of the mechanism of a gazoraspredeleniye
      3.1.6. Yokes and bars of pushers
      3.1.7. Springs of valves, plates, maslosjemny caps
      3.1.8. Soaking-up and final collectors
      3.1.9. Head of cylinders
      3.1.10. Pushers
      3.1.11. Crankshaft pulley
      3.1.12. Forward epiploon of the crankshaft
      3.1.13. Forward cover
      3.1.14. Cam-shaft and drive gear wheels
      3.1.15. Cam-shaft and support
      3.1.16. Replacement of bearings
      3.1.17. Oil pallet
      3.1.18. Oil pump
      3.1.19. Flywheel (a leading disk of the hydrotransformer)
      3.1.20. Back epiploon of the crankshaft
      3.1.21. Suspension bracket and engine details
   + 3.2. Verkhneklapanny engine 1FZ-FE
   + 3.3. Dismantle and major maintenance of the engine
   + 3.4. Engine electric equipment
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes




3.1.20. Back epiploon of the crankshaft

Replacement

PERFORMANCE ORDER
1. The epiploon can be removed without dismantle of the oil pallet or the crankshaft.
2. Remove a check point (transmission) (see subsection 7.1.2 or subsection 7.2.8).
3. Remove coupling.
4. Remove a flywheel (a leading disk).
5. Carefully hook and get an epiploon.
6. Clear and check a condition of a surface of a pro-point under an epiploon in the block of cylinders and a neck of the crankshaft condensed by an epiploon. At detection of deep development the crankshaft replace.
7. Grease working edges of a new epiploon with molybdenic greasing, external edges grease with universal konsistentny greasing.
8. Carefully dress an epiploon on a neck of the crankshaft and press an epiploon an opravka.
9. Further assembly is carried out upside-down. Establish transmission (see subsection 7.1.2 or subsection 7.2.8).