Toyota Land Cruiser
FJ60, FJ62 and FJ80 1980-1997 of release
Repair and car operation
Toyota Land Cruiser
+ 1. Maintenance instruction
- 2. Maintenance
2.1. Additional maintenance
2.2. Technical characteristics
2.3. An arrangement of units in a motor compartment
2.4. Maintenance terms
+ 2.5. Check of level of liquids
2.6. Check of a condition of tires and pressure in tires
2.7. Liquid level in automatic transmission
2.8. Liquid level in system of a hydraulic actuator of a steering
2.9. Oil replacement in the engine and the oil filter
2.10. Check of a condition and care of the battery
2.11. Check of system of cooling
2.12. Check and replacement of hoses in a motor compartment
2.13. Check and replacement of brushes of a cleaner of a windscreen
2.14. Shift of wheels
2.15. Suspension bracket and steering check
2.16. Check of an exhaust system
2.17. Check of level of oil in a manual transmission
2.18. Check of level of oil in a transfer case
2.19. Check of level of oil in reducers of bridges
2.20. Check of a condition of seat belts
2.21. Thermostat of the air filter (carburetor engines)
2.22. Check and greasing of the exhaust valve
2.23. Catching system паров gasoline
2.24. Check of system of a retsirkulyatsiya
2.25. Air zaslonka of the carburetor
2.26. Zolotnik of system of ventilation of a case
2.27. Check and replacement of the air filter
2.28. Replacement of spark plugs
2.29. Check and adjustment of gaps of valves
2.30. Idling turns (carburetor engines)
2.31. Drive belts
2.32. Check of fuel system
+ 2.33. Check of brakes
2.34. Check and adjustment of pedals of coupling (brake)
2.35. Replacement of the fuel filter
2.36. High-voltage wires, begunok and distributor covers
2.37. Check and installation of the moment of ignition
2.38. Care of cooling system
2.39. Naves and bearings of forward wheels
2.40. Liquid replacement in automatic transmission and the filter
2.41. Oil replacement in a manual transmission
2.42. Oil replacement in a transfer case
2.43. Oil replacement in a back (forward) reducer
2.44. Gaps in valves on the engine 1FZ-FE
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes
2.1. Additional maintenance
In this Management the term "maintenance" belongs to set of carried-out works, instead of to concrete procedure. If from the moment of acquisition of the new car in accuracy to observe a maintenance order, to carry out frequent checks of level of liquids and details subject to the strengthened wear, at the engine high operational qualities and volume of additional works will remain will be minimized.
Irregular maintenance can become the main reason for abnormal operation of the engine. Especially it concerns the engine acquired not the new car which was not exposed to regular checks. In such cases besides periodic maintenance, it is necessary to perform additional adjustment works.
Any kind of works on maintenance, or search of the reason of abnormal operation of the engine should be begun with compression check in cylinders. Compression check in cylinders gives valuable information relatively the general condition of many details of the internal device of the engine which can be used as fundamental both for the current maintenance, and for repair procedures. If, for example, a compression such is that strong wear of the engine is obvious, routine maintenance will not lead to restoration of normal operational qualities and all works will be reduced to an excessive waste of time and money.
Below the list of the works which performance often leads to restoration of normal operation of the engine is provided.
Minor adjustment works
Check a condition and level of all liquids of the engine.
Clear, examine and check the storage battery.
Check cooling system.
Check all hoses in a motor compartment.
Check a condition of a zolotnik of ventilation of a case.
Check a condition of the air filter and the filter of ventilation of a case.
Replace spark plugs.
Check high-voltage wires, a cover and a begunok of the distributor of ignition.
Check and adjust gaps in valves.
Check and adjust turns of idling and the ignition moment.
Check a condition drive belts.
Main adjustment works
Perform all minor works and what are listed below:
Check retsirkulyatsiya system.
Replace a zolotnik of ventilation of a case.
Replace the air filter and the filter of ventilation of a case.
Check fuel system.
Replace the fuel filter.
Replace wires, a cover and a begunok of the distributor of ignition.
Check ignition system.
Check system of a charge of the battery.