Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Additional maintenance
   2.2. Technical characteristics
   2.3. An arrangement of units in a motor compartment
   2.4. Maintenance terms
   + 2.5. Check of level of liquids
   2.6. Check of a condition of tires and pressure in tires
   2.7. Liquid level in automatic transmission
   2.8. Liquid level in system of a hydraulic actuator of a steering
   2.9. Oil replacement in the engine and the oil filter
   2.10. Check of a condition and care of the battery
   2.11. Check of system of cooling
   2.12. Check and replacement of hoses in a motor compartment
   2.13. Check and replacement of brushes of a cleaner of a windscreen
   2.14. Shift of wheels
   2.15. Suspension bracket and steering check
   2.16. Check of an exhaust system
   2.17. Check of level of oil in a manual transmission
   2.18. Check of level of oil in a transfer case
   2.19. Check of level of oil in reducers of bridges
   2.20. Check of a condition of seat belts
   2.21. Thermostat of the air filter (carburetor engines)
   2.22. Check and greasing of the exhaust valve
   2.23. Catching system паров gasoline
   2.24. Check of system of a retsirkulyatsiya
   2.25. Air zaslonka of the carburetor
   2.26. Zolotnik of system of ventilation of a case
   2.27. Check and replacement of the air filter
   2.28. Replacement of spark plugs
   2.29. Check and adjustment of gaps of valves
   2.30. Idling turns (carburetor engines)
   2.31. Drive belts
   2.32. Check of fuel system
   + 2.33. Check of brakes
   2.34. Check and adjustment of pedals of coupling (brake)
   2.35. Replacement of the fuel filter
   2.36. High-voltage wires, begunok and distributor covers
   2.37. Check and installation of the moment of ignition
   2.38. Care of cooling system
   2.39. Naves and bearings of forward wheels
   2.40. Liquid replacement in automatic transmission and the filter
   2.41. Oil replacement in a manual transmission
   2.42. Oil replacement in a transfer case
   2.43. Oil replacement in a back (forward) reducer
   2.44. Gaps in valves on the engine 1FZ-FE
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes




2.36. High-voltage wires, begunok and distributor covers

GENERAL INFORMATION

Characteristic defects of a cover of the distributor

1. Cracks on a wire conclusion

2. Cover cracks

3. Breakdown

4. Erosion of electrodes

5. Wear of a piece of coal

Check and replacement

PERFORMANCE ORDER
1. High-voltage wires of spark plugs should be checked (and if necessary to change) at the same time with replacement of candles.
2. The simplest way of check consists in survey of wires on the working engine in the blacked-out garage. At detection of a luminescence (breakdown) of a wire replace. Check a condition of a cover and a distributor begunka.
3. For check and cleaning of wires disconnect each wire separately. On cars of late releases it is required to remove a slip on a cover of a head of cylinders. Disconnect a wire on a distributor cover. Check a condition of contacts of wires and sealants. Wipe wires. A wire strongly do not bend, as the current-carrying vein can break. At detection of cracks, traces of breakdown and a podgoraniye of a wire replace.
4. Check corrosion existence on sockets of tips of wires (from both parties) and conclusions of candles. Check durability of demountable connection, having dressed on a candle a tip of a wire and having shaken it. At leaky connection draw in contact petals.
5. Unscrew screws of fastening and uncover the ignition distributor. Wipe a cover absolutely and check existence in and outside of a cover of cracks, traces of superficial breakdown (the thin charred paths), wear, a podgoraniye and weakening of contacts (see fig. Characteristic defects of a cover of the distributor).
6. Take a begunok (a photo at the left) and examine in the places specified by shooters a photo on the right.
7. If the old cover is established, check resistance between a conclusion of a cover and a candle. If resistance exceeds norm, replace a cover and a wire. Change each wire separately.