Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Additional maintenance
   2.2. Technical characteristics
   2.3. An arrangement of units in a motor compartment
   2.4. Maintenance terms
   + 2.5. Check of level of liquids
   2.6. Check of a condition of tires and pressure in tires
   2.7. Liquid level in automatic transmission
   2.8. Liquid level in system of a hydraulic actuator of a steering
   2.9. Oil replacement in the engine and the oil filter
   2.10. Check of a condition and care of the battery
   2.11. Check of system of cooling
   2.12. Check and replacement of hoses in a motor compartment
   2.13. Check and replacement of brushes of a cleaner of a windscreen
   2.14. Shift of wheels
   2.15. Suspension bracket and steering check
   2.16. Check of an exhaust system
   2.17. Check of level of oil in a manual transmission
   2.18. Check of level of oil in a transfer case
   2.19. Check of level of oil in reducers of bridges
   2.20. Check of a condition of seat belts
   2.21. Thermostat of the air filter (carburetor engines)
   2.22. Check and greasing of the exhaust valve
   2.23. Catching system паров gasoline
   2.24. Check of system of a retsirkulyatsiya
   2.25. Air zaslonka of the carburetor
   2.26. Zolotnik of system of ventilation of a case
   2.27. Check and replacement of the air filter
   2.28. Replacement of spark plugs
   2.29. Check and adjustment of gaps of valves
   2.30. Idling turns (carburetor engines)
   2.31. Drive belts
   2.32. Check of fuel system
   + 2.33. Check of brakes
   2.34. Check and adjustment of pedals of coupling (brake)
   2.35. Replacement of the fuel filter
   2.36. High-voltage wires, begunok and distributor covers
   2.37. Check and installation of the moment of ignition
   2.38. Care of cooling system
   2.39. Naves and bearings of forward wheels
   2.40. Liquid replacement in automatic transmission and the filter
   2.41. Oil replacement in a manual transmission
   2.42. Oil replacement in a transfer case
   2.43. Oil replacement in a back (forward) reducer
   2.44. Gaps in valves on the engine 1FZ-FE
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes




2.34. Check and adjustment of pedals of coupling (brake)

PERFORMANCE ORDER
Pedal height
1. Check distance of pillows of pedals from a floor. If this distance differs from norm, adjust.
2. For adjustment of a pedal of coupling release a lock-nut of an adjusting bolt (And) and wrap a bolt. Then release a lock-nut of a rod of the main cylinder (In). Rotating a rod, adjust distance so that it corresponded to the range middle. Tighten a rod lock-nut.
3. For check of height of a pedal of a brake start the engine and press several times a pedal then check pedal height. For adjustment release a lock-nut of an adjusting bolt (or the switch), release a rod lock-nut. Rotating a rod, adjust distance so that it corresponded to the range middle. Tighten a rod lock-nut.
4. Wrap the switch or a bolt clockwise before contact with a pedal platform. Tighten a lock-nut.
Free wheeling of a pedal
5. Press a pedal a finger and measure distance to feeling of weakness in resistance to moving.
6. In need of adjustment of a free wheeling of a pedal of coupling release a lock-nut of a rod and displace a rod so that the free wheeling corresponded to norm. Tighten a lock-nut.
7. For adjustment of a free wheeling of a pedal of a brake on the stopped engine press 6 times a pedal then check a course. Release a lock-nut of a rod and displace a rod so that the free wheeling corresponded to norm. Tighten a lock-nut.