Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation

Toyota Land Cruiser
+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Additional maintenance
   2.2. Technical characteristics
   2.3. An arrangement of units in a motor compartment
   2.4. Maintenance terms
   + 2.5. Check of level of liquids
   2.6. Check of a condition of tires and pressure in tires
   2.7. Liquid level in automatic transmission
   2.8. Liquid level in system of a hydraulic actuator of a steering
   2.9. Oil replacement in the engine and the oil filter
   2.10. Check of a condition and care of the battery
   2.11. Check of system of cooling
   2.12. Check and replacement of hoses in a motor compartment
   2.13. Check and replacement of brushes of a cleaner of a windscreen
   2.14. Shift of wheels
   2.15. Suspension bracket and steering check
   2.16. Check of an exhaust system
   2.17. Check of level of oil in a manual transmission
   2.18. Check of level of oil in a transfer case
   2.19. Check of level of oil in reducers of bridges
   2.20. Check of a condition of seat belts
   2.21. Thermostat of the air filter (carburetor engines)
   2.22. Check and greasing of the exhaust valve
   2.23. Catching system паров gasoline
   2.24. Check of system of a retsirkulyatsiya
   2.25. Air zaslonka of the carburetor
   2.26. Zolotnik of system of ventilation of a case
   2.27. Check and replacement of the air filter
   2.28. Replacement of spark plugs
   2.29. Check and adjustment of gaps of valves
   2.30. Idling turns (carburetor engines)
   2.31. Drive belts
   2.32. Check of fuel system
   + 2.33. Check of brakes
   2.34. Check and adjustment of pedals of coupling (brake)
   2.35. Replacement of the fuel filter
   2.36. High-voltage wires, begunok and distributor covers
   2.37. Check and installation of the moment of ignition
   2.38. Care of cooling system
   2.39. Naves and bearings of forward wheels
   2.40. Liquid replacement in automatic transmission and the filter
   2.41. Oil replacement in a manual transmission
   2.42. Oil replacement in a transfer case
   2.43. Oil replacement in a back (forward) reducer
   2.44. Gaps in valves on the engine 1FZ-FE
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes

2.15. Suspension bracket and steering check

GENERAL INFORMATION

See fig. Details of a forward suspension bracket of FJ60 cars, 62, fig. Forward suspension bracket of FJ80 cars.

Check

PERFORMANCE ORDER

1. Establish wheels in the provision of driving on a straight line, block wheels. Turn a steering wheel to the right and to the left. If it is felt considerable люфт, the reason is wear of bearings of naves (see subsection 2.39), a shaft of a steering column, an intermediate shaft, spherical support of levers of a suspension bracket or spherical hinges of the steering mechanism, either the wrong adjustment or wear of the steering mechanism.
2. Kachany bodies indicate abnormal work and wear of details of a steering and a suspension bracket at movement on the bumpy road strengthened, drift at turn, jamming of a steering wheel.
3. Check operation of shock-absorbers for what several times sharply press each corner of the car and release. If after one-two pressing the body of the car does not come back to a starting position, it indicates failure of racks of a suspension bracket and need of their replacement. By pressing and an otpuskaniye of the car listen to sounds which publish suspension bracket details.
Check from below car
4. Lift the car and establish on supports.
5. Check drawing of a protector and pressure in tires.
6. Check a condition of the kardanny hinge between a steering column and a case of the steering mechanism.
7. Check existence on a case of the steering mechanism of podtekaniye of oil or infiltration through laying. Be convinced of integrity of consolidations and protective covers, in reliability of fastening of collars of protective covers.
8. Check reliability of fastening of details of a steering, absence on them mechanical damages. Check existence люфта spherical hinges of a steering rack.

9. Check an inhaling of all carving connections, existence of the broken or disconnected details, a condition of sealants (are specified by an arrow a photo at the left) and rubber plugs of a suspension bracket (a photo on the right).
10. Ask the assistant повращать a wheel, observe at wheel turn for lyufty in steering details, a bend of details, freedom of their moving (люфтами). At detection considerable люфтов in connections of a steering find weakened connection.
	11. Check bearings of wheels, rotating a wheel and shaking having undertaken the top and bottom edges. Appreciable люфт points to need of dismantling of a nave and greasing replacement.
12. Check a condition of bearings of rotary knot for what shake knot mount up-down. If it is found люфт, it is necessary to check a condition of bearings of knot and to replace greasing.
13. Check a condition of kardanny hinges, existence люфта the sliding bifurcate coupling in shlitsa of a shaft.
14. Check existence of podtekaniye in a boat of a transfer case and transmission.

Greasing of a running gear

PERFORMANCE ORDER

1. Greasing is carried out by a syringe through butterdishes (on a part of cars of an opening under butterdishes are closed by caps, butterdishes are rolled at greasing).
	2. Greasing begin with rotary knot (the place of greasing is specified by an arrow). Greasing continue until then while it will not seem from the greased knot.
	3. Further grease a fork of the sliding shlitsevy coupling (the place of greasing is specified by an arrow).
	4. Grease the kardanny hinge (the place of greasing is specified by an arrow).
	5. Grease the limiter of turn of a wheel (the place of greasing is specified by an arrow).
6. Grease litoly latches and a cowl rack.
7. Oil for the engine of a loop and locks of a cowl and doors.
8. Grease with aerosol graphite or silicone greasing drums of switches of locks and a sealant of doorways.