| Carburetor engines | 
  
 
 |  1. The filter is mounted from below about a fuel tank (in this case lift the car), or in a motor compartment. | 
  
 
 |  2. Weaken a collar. | 
  
 
 |  3. Disconnect from the filter hoses. Sdeformirovannye hoses replace. | 
  
 
  | 
 4. Get the filter, establish new, collect upside-down. Track, that the arrow on the case was directed towards a hose from the carburetor. Start the engine and be convinced of lack of a leak. | 
  
 
 | Injector engines | 
  
 
  | 
 5. Unscrew bolts of unions, designate and disconnect hoses, unscrew bolts of an arm and remove the filter. | 
  
 
 | 6. Weaken a collar, remove the filter and establish new a fillet down. Further assembly is carried out upside-down. Replace laying of unions.  | 
  
  
  |